www.lambrettaupgrades.co.uk                         Dedicated to upgrading your Lambretta and Vespa. 

 
    Company Reg. No. 08307000                VAT No: GB303939503
 

Web Store

All Products / Top end - Barrels, pistons & heads

Avanti kits, heads and supertune parts, TS1, RB and rapido kits and parts from AF's, RT kits from MBD........and more to come!

Sort:

All Accessories, Extras, Etc Air/Fuel/Carburettors, parts, jets and spares. Badges - horncast, legshield, one-offs and specials Bearings Books, patches & button badges Brakes Bulbs Cables Carburettor side panel grills Clutch parts CNC rear shocks Conversion R1 & R6 rear shocks, spares and parts Cranks and associated parts Custom Flywheel cowls - Lambretta and Vespa Disc brake kits and parts Electrical Exhausts Forks, Front hub and Rear hub parts Frame and bodywork Fuel tanks Gaskets Gearbox Headset Parts Iwis chain Kickstart, casing and chaincase side parts Lambretta engine internals Lambretta & Vespa Stainless disc brake hoses Lighting Magneto housing, flywheels & parts Miscellaneous New under/over chain guides Nuts, bolts and washers Oils - Grease - Cleaners Packer Plates and head gaskets Reed blocks, manifolds and parts Rubbers and trim seals and 'o' rings Seats and associated parts Services Spark plugs - Lambretta and Vespa *special offers* Stainless nut and bolt kits Stainless rear hub lock rings Stainless steel parts Standard rear shocks Stator, flywheel and parts Studs Tools Top end - Barrels, pistons & heads Transmission T-shirts, Stickers, Merchandise Etc Vespa parts Wheels, rims & tyres
Displaying 1 - 36 of 72 products
Lambretta Top End - 250cc Cylinder head, 9.5:1 compression
£34.49
Lambretta top end - 225cc Cylinder head, 9.5:1 compression
£34.49
RB25 - Complete 250cc kit, without head - Triple exhaust port type
£569.99
cylinder kit - RaceTour RT225 - MBgm
£429.99
Tools - Piston pin removal tool - 16mm
£6.49
Inlet manifold - Big block, 200cc spacings with flange rubber - MBD, 26 - 30mm, PHBH Etc.
£42.49
Top end - Small block Scootopia 185 kit
£320.00
Extra deep M8 cylinder head nuts - pack of 4 - Avanti, AF mammouth heads
£3.00 £2.25
Magneto flange - Large crank fly and head cowling spacer - 10mm
£14.99 £17.50
Magneto flange - Large crank fly and head cowling spacer - 8mm
£9.99 £14.99
Magneto flange - Large crank fly and head cowling spacer - 5mm
£7.49 £9.99
Piston rings - BGM 195cc RaceTour - Ø=65.0x1.0mm
£16.49
Gasket - 150cc head gasket - aluminium, standard (1mm - 1.12mm)
£1.49
Tools - Gasket sealant - Reinzosil 300, 70ml
£8.99 £12.99
Gasket - Head packer plate, aluminium - 0.5mm, 1mm standard or 1.5mm - 250cc, RB, Super Monza, Rapido Etc.
£2.25 £2.99
Piston rings - 72mm, 250cc - Asso, 1mm thick - pair
£29.49
Inlet manifold - 22mm, large block
£14.99
Inlet manifold - 22mm, small block
£15.99
TS1 - Piston rings, 1mm thick - 225cc
£26.99
*Discontinued* Drive seal plate - stainless steel
£10.49
Exhaust - Brass nut, extended
£0.59
Carburettor - Inlet rubber, flanged type - 30mm I.D, PHBH Etc.
£14.99
LARGE Block Aluminium Base Gasket packer plate - 2.5mm and 3.0mm
£3.75 £4.99
Small Block Aluminium Base Gasket packer plate - 2.5mm and 3.0mm
£3.49 £4.99
Cylinder head - Extended barrel stud nuts and washers, set of 4 - BGM
£13.50
Lambretta - Cylinder head cowling - Standard cut-outs
£24.99
cylinder kit - RaceTour RT195cc - MBgm
£429.99
Cowl - Head cowl, stainless steel - With vent
£48.99
Washer - Cylinder head, M8 - Carbon steel, 2mm thick - Set of 4
£2.70
Cylinder head - Avanti, small block 200cc
£95.00 £100.00
Gasket - Inlet, aftermarket reed block to barrel - LTH, Atomic Etc.
£0.89
Lambretta - Cylinder head Cowling - Cut inlet/exhaust to fit RB - New style
£24.75
Spacer nut - M8, cylinder head
£0.89
Circlip - Standard piston circlip - Pair, 16mm
£0.50
Circlip - Piston circlip, wire type with 'tail' - Pair
£0.50
Cylinder head - Avanti, Ron moss/Supertune - 72mm, RB250, Rapido250 Etc
£95.99 £110.00